Oce Linium PRO C6500, Руководство по сканеру

Страница: 113 / 276

CS240 4-9
Specifying utility mode parameters 4
5
Touch [OK].
6
Touch [Index], and then select the index characters.
7
Touch [OK].
8
Touch [E-Mail Address], and then type in the e-mail address, using the keyboard that appears.
9
Touch [OK], and then touch [OK] in the next screen that appears.
The e-mail destination is registered.
!
Detail
To check a registered destination, select it, and then touch [Check Job Set.].
To change the settings for a registered destination, select it, and then touch [Edit].
To delete a registered destination, select it, and then touch [Delete].
2
Note
The registration cannot be completed if no settings are specified for "Name" and "E-Mail Address".
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears.
User box
Settings can be specified for the following for the user box destination to be registered.
!
Detail
In order to register a user box as a destination, the user box must be registered first. For details, refer
to the User manual – Box Operations.
For details on displaying the Create One-Touch Destination screen, refer to "Displaying the create one-
touch destination screen" on page 4-4.
Parameter Description
Name Type in a name of 24 characters or less for the registered destination.
Index Select the index characters. For frequently used destinations, touch [Favorites] so
that the destination can be found more easily.
User Box Select one user box where data is to be saved.