Oce CS172 FK-502, Руководство пользователя

Страница: 503 / 514

Appendix 14
CS172 14-9
M Manual transmis-
sion This operation to send documents while confirming the
status of the receiving machine.
Memory The location to store data. It is used to specify the com-
munication or store the document.
Memory overflow The state of the fax image memory in this machine to be
full during storing transmitted document.
Memory RX The function to store the received document and print the
document as necessary.
Memory Substitute
Reception The function to store transmitted document in the memory
automatically when the received document cannot be
printed due to the machine being out of paper.
Memory transmis-
sion In this transmission method, all pages being sent are first
scanned and stored in memory before transmission. The
document is automatically numbered by total page
number, and the images on the first page are shown on
communication results report.
However, when a large number of pages are sent or when
the images on the originals are fine, memory capacity may
be exceeded due to the large amount of data stored in
memory.
Mixed Original The function to set and send document pages of mixed
sizes by a single sequence of operations.
O Original size set The function to designate the paper size for the document
to be sent. Normally, when the paper size loaded at the
destination is too small to accommodate the image being
transmitted, the original image will be reduced to fit the
paper size. This feature gives you the option printing a
portion of the image with no reduction.
Originating station The facsimile to provide instruction to send document to
multiple stations.
Overseas TX The international communication. In Overseas TX, a lower
baud rate will be employed. Select this mode if you send
a fax to the location at which the communication condition
is poor even if it is in your country.
P Password TX The function to send fax with a password. Sender has to
send a fax with the same password which is set in Closed
Network RX if the Closed Network RX is set at the recipi-
ent.
Pause To dial at certain intervals. Pressing the key once creates
an interval of one second.
Polling The function to send a fax that has been read and stored
in the memory in the facsimile when a polling command is
sent from the recipient.
Program The function to register frequently-used fax numbers as
well as templates of operating sequences. Thereafter, you
may select the destination or designate a sequence of op-
erations by pressing the Program key (in the abbreviated
dialing list).
Terms Description