Oce Arizona 640 GT, Руководство пользователя, Страница: 45 / 230

Flatbed Settings A dialog window automatically appears when confirmation is required. If it
is closed before you select Confirm, it can be reopened by clicking on this
button.
Media Parameters
Enter or confirm the thickness of the media. The printer will automatically
adjust the carriage height to media thickness and also the print gap. Media
thickness confirmation is required only for the first copy of a print job, un-
less it is changed during printing. If the media thickness value is changed
while printing, confirmation is requested before printing the next copy.
Lamp Power Control
Allows the operator to control the power output of each UV lamp inde-
pendently. To extend lamp life, use the lowest setting that provides ade-
quate curing for a particular media.
Leading and Trailing Edge are relative to the direction of carriage travel. To
enable or disable this setting, see the User Interface section of the Settings
page "Tie lamp controls together". When enabled, this feature automatical-
ly matches the power of the trailing UV lamp, when power of the leading
UV lamp changes. It is still possible to adjust the power of the trailing UV
lamp individually, when this setting is not enabled.
Roll enable Click on the Roll icon to enable or disable the Roll Media Option print
queue (this allows you check media parameters before the job actually
prints). Roll media print jobs will not print unless this icon is selected.
NOTE
Roll media print jobs do not require user actions to start the print
job once Roll module is initialized (see Roll Media Manager in the
RMO) If this icon is selected, and the job status is not on Hold,
roll media print jobs will start automatically when the printer re-
ceives the job.
Roll Media Man‐
ager
The Roll Media Manager allows the operator to load and unload media and
to initialize the Roll module so that the tension on the roll media is set and
the job is ready to print.
Create Batch In the Batch Mode Operation individual print jobs are sent from the RIP to
the printer, and then combined on the printer to create a batch job for flat-
bed printing. There are two types of batch mode jobs: Composite and Col-
lation.
In a Composite batch all images are printed on a single piece of media
without interruption. Composite batch mode can be used to efficiently print
more than three data layers and/or mix print modes for a batch job.
A Collation batch prints a set of individual print jobs on individual pieces of
media, and then repeats the number of copies of the set, as required. The
gantry moves to the park position between each print job, the media is
changed, and media thickness confirmation and pushing the start button is
required to continue printing the next copy.
Refer to Customer Application Bulletin 45 "Batch Mode Operation" on the
DGS website http://dgs.oce.com/ for more details and examples.
4
Print Job Control Module
Chapter 4 - How to Navigate the User Interface 45
Océ Arizona 600 Series