Oce Arizona 640 GT, Руководство пользователя, Страница: 44 / 230

status (whether ink is being pumped into the reservoir), and whether the reservoir is full. The
dialog also shows the current printhead temperature, the meniscus vacuum level, and the purge
pressure.
4 & 5) Command Toolbar
The toolbar contains icons that allow you to interact with the printer (icons are listed in the table
below in the order they are displayed on the command toolbar). Note that some of the icons have
a checked and unchecked state with a different appearance of the icon image to reflect their state.
[35] Command Toolbar
Command Toolbar Icons Explained
Print job This command can do the following actions depending on context:
• Activates a selected inactive job by moving it to the active list.
• Un-holds a held job.
• Un-holds an job that had an error currently.
Hold job The command can do following actions depending on context:
• Puts an active job on hold.
• Waits until the printer finishes a currently printing copy and puts the job
on hold.
Cancel job The command can do following actions depending on context:
• Deactivates a selected active job by moving it to the inactive list. Note
that Special Prints will not move to the inactive list.
• Cancels a currently printing job and moves it to the inactive list. Note
that the first click cancels the print, but the carriage will continue to ap-
ply curing passes so that the ink cures properly. A second click termi-
nates the print job immediately.
Delete job Deletes a job from the printer. However, you cannot delete a job that is cur-
rently printing.
Flatbed icon Process flatbed jobs toggle command - Allows printer to process flatbed
jobs. This must be selected to enable flatbed printing when the printer is
booted or after re-setting the printer due to an error.
4
Print Job Control Module
44 Chapter 4 - How to Navigate the User Interface
Océ Arizona 600 Series