Oce 9400-I, Руководство пользователя

Страница: 87 / 159

Customizing the printer 87
HP-GL/2
HP-GL/2 print origin
The term “print origin” refers to the point on the paper at which printing starts.
You can choose among the following options: upper right, upper left, center,
lower right and lower left. The default is lower right.
▼
Defining the HP-GL/2 print origi
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using t he or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using t he or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
HP
-
GL
/2
SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
HP
-
GL
/2
SETUP
’ menu.
8
Select the ‘
ORIGIN
’ item using t he or button.
9
Press ‘next/select’ to enter the ‘
ORIGIN
’menu.
10
Select the required origin item using t he or button.
11
Press ‘next/select’ to confirm the selected origin.
12
Press ‘Program’ to exit the main menu.
HP-GL/2 page advance
The SP0 command in HP-GL/2 can be interpreted in two ways, depending on
the printer being emulated.
If ‘
PAGE ADVANCE
’ is set to yes, the printer interprets the HP-GL instruction
SP0 as an end-of-print indicator.
If ‘
PAGE ADVANCE
’ is set to no, the printer interprets the HP-GL instruction
SP0 as “select pen zero”. Any vectors following the SP0 will be printed with
the defined pen attributes (width and pattern). The default is No. See also
‘Defining pen settings’ on page 8 0 .
▼
Setting the HP-GL/2 page advanc
1
Press ‘Program’ to enter the main menu.