Oce 9400-I, Руководство пользователя

Страница: 32 / 159

32 Océ 9400-II User Manual
Printing via FTP
Once the network connection for the Océ 9400-II has been set up, you can print
via FTP.
Note:
File Transfer protocol (FTP) has been implemented as specified in RCF
959. We are also web browser compatible, so the Océ 9400-II printer can be
accessed like any Ftp site from your web browser.
▼
Printing via FT
Note:
Although FTP is not a standard printing protocol, you can send data files
to a remote directory via FTP. This remote directory then allows the data files
to be printed.
1
Launch an FTP client.
2
Enter the ‘ftp’ command.
3
Open an FTP session with the printer using its address or the registered name
(HOSTS or DNS).
Note:
Instead of performing steps 2 and 3, you could also enter “ft
host_name” in the FTP client.
4
Enter your user name (e.g. ‘Guest’).
A connection is now set up for the default user ‘Guest’.
5
In order to be connected to the remote server, you must then validate the user
connection by typing in the user password (e.g. ‘Guest’).
Note:
Because there is no registered user, you can simply press Enter t
initiate the connection. The user name and password are not checked by th
Océ 9400-II.
6
Set the transmission mode to binary by entering ‘binary’.
7
Enter the following command to go to the jobs directory: ‘cd jobs’.
8
Go to the local directory where the information you want to print is stored (for
example C:\DRAWINGS), by using the following command:
‘lcd C:\DRAWINGS’.
9
Send the data file (for example: sample.hp) via the ‘put’ command:
‘put sample.hp’.
Note:
The ‘mput’ command is also supported.
The data is now sent to the controller's input spool directory, and is then
processed and finally printed.
10
Quit FTP by entering the ‘bye’ or ‘quit’ command.