Oce 9400-I, Руководство пользователя

Страница: 24 / 159

24 Océ 9400-II User Manual
5
Press ‘next/select’ to enter the ‘
CONNECTION
’ menu.
6
Select the ‘
CENTRONICS
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
CENTRONICS
’ menu.
8
Select the ‘
ECP
’ mode using the or button.
9
Press ‘next/select’ to enter the ‘
ECP
’ menu.
10
Select the required setting usi ng the or button.
11
Press ‘next/select’ to confirm the selected type.
12
Press ‘Program’ to exit the main menu.
▼
Defining the end-of-plot time-ou
Normally, print files end with an instruction that tells the printer that the file is
finished.
However, some print data files do not have an end-of-print instruction. In this
case, the print will be considered ‘finished’ when the printer stops receiving
graphic commands over the Centronics interface.
The print time-out option sets the delay after which the print is considered
finished. You can choose between 15, 30, 180, or 500 seconds. The default is
180.
1
Press ‘Program’ to enter the main menu.
2
Select the ‘
CONFIGURATION
’ item using t he or button.
3
Press ‘next/select’ to enter the ‘
CONFIGURATION
’ menu.
4
Select the ‘
CONNECTION
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
CONNECTION
’ menu.
6
Select the ‘
CENTRONICS
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
CENTRONICS
’ menu.
8
Select the ‘
PLOT TIME OUT
’ item using t he or button.
9
Press ‘next/select’ to enter the ‘
PLOT TIME OUT
’ menu.
10
Select the required plot time-out usi ng the or button.
11
Press ‘next/select’ to confirm the selected plot time-out.
12
Press ‘Program’ to exit the main menu.