Oce 3165, Руководство пользователя

Страница: 90 / 206

90 Océ 3165 User Manual
application itself supports 2-sided printing). Or select 1-sided or 2-sided to
overrule possible document settings and always print documents 1- or 2-sided.
4
Select the required setting for ‘Staple’: ‘As in document’ means that the
document is not stapled, unless you have added a print code in the document
to set stapling on (if the application allows the user to do so). When stapling is
set to ‘Yes’, any statements in the print code regarding stapling are overruled.
If the number of printed sheets exceeds the maximum number the stapler can
handle, stapling will not be done after all.
5
You can continue customizing other settings or click ‘OK’ to close the setup
window.
Note:
When clicking the ‘Default’ button, all changed settings are reset to
their factory settings. An overview of the factory settings is described in
appendix A, ‘Overview and tables’ on page 171.
Customizing layout settings
The settings which are related to finishing a report are gathered in the Layout
tab (see figure 45). The settings ‘Paper size’, ‘Scale’ (PS only) and
‘Orientation’ are only selectable in the setup window and cannot be overruled
in the print command window. Other settings are also available in the print
command window, see chapter 6, ‘Extended print jobs’ on page 117 for more
information on these settings.
▼
Customizing layout settings
1
Open the setup window of the Océ 3165 printer driver as described in
‘Opening the setup window’ on page 88.
2
Click the ‘Layout’ tab (see figure 45 on page 91).
3
In the pulldown menu of ‘Paper size’ select the default paper size of your
reports. The application also considers the available paper sizes of the selected
printer. And, again, selecting another printer may also influence the page
layout in your document.
4
PostScript driver only: select the required ‘Scale’ setting. The image scaling
percentage for zooming is default set to 100 percent. The percentage the print
is scaled from the centre of the image (enlarged for values above 100%,
reduced for values below 100%). Default value is 100% (= no scaling).
Minimum value is 25%, maximum value is 400%, steps of 1 % are possible.
Please be aware that this then applies to all your documents.
5
Select the required default setting for ‘Orientation’: you can define whether
your originals are to be printed in portrait(
) or landscape( ) orientation.
6
Continue customizing other settings or click ‘OK’ to close the setup window.