Oce 3165, Руководство пользователя

Страница: 57 / 206

Extended copy jobs 57
The binding edge is either long or short. The position of the binding edge
defines whether the information on the rear side of the copy is rotated 180
degrees or not (see figure 29).
When selecting a long binding edge,
for
copy material this results in a document in booklet form,
for copy material this results in a document in calendar form
When selecting a short binding edge:
for
copy material this results in a document in calendar form,
for copy material this results in booklet form
Note:
If you want to convert a ‘tumbled’ original into a report with a
horizontal page turn in one step, refer to ‘Copying calendar originals’ on
page 58.
▼
Defining the location and size of the binding edge
1
Place the originals in the automatic feeder. Make sure you place the originals
in the right position (
or ).
2
Indicate whether the originals are 1 or 2-sided and choose 2-sided copies using
the ‘Original’ and ‘Copy’ function buttons.
Note:
The binding setting is not useful when 1-sided copies are chosen.
3
Open the section ‘Extra’.
4
Select the ‘Copy binding’ settings.
5
Press the function button ‘Binding’ to define the binding edge of the copy.
6
If required, press the function buttons ‘Margin shift front’ and/or ‘Margin shift
back’ to specify a margin shift for the front page and/or back page of your
copy. Use the arrow buttons to alter the margin (max. -25 mm or max. +25
mm). Also refer to ‘Altering the margin (image shift)’ on page 59 and
‘Stapling copies’ on page 38.
Note:
If you are feeding originals, make sure the corresponding paper
tray is selected.
7
Make other selections as required.
8
Select the required number of sets, using the copy quantity buttons.
9
Press the start button .