Oce 3165, Руководство пользователя

Страница: 16 / 206

16 Océ 3165 User Manual
The operating panel
The Océ 3165 operating panel is designed in such a way to perform both
simple and complex copy and print jobs in a user-friendly manner.
Note:
An illustration of the Océ 3165 operating panel is presented on the
inside back cover which can be folded out.
Standard settings
After warming up, the Océ 3165 is in initial mode. When
using the Océ 3165 Digital Copier, you will see the basic copy job settings (see
figure 1 on page 17). If you have the Océ 3165 Network Copier, the initial
mode may show the basic copy job settings (see figure 2 on page 17) or a list
of users who use the Océ 3165 for printing (see figure 3 on page 17). It can be
defined by the key operator what initial mode is used.
By factory default, the initial mode will show the basic copy job settings.
These settings are usually intended for making double-sided copies from
single-sided originals using A4 paper from tray 4 with no reduction or
enlargement (i.e. set at 100%).
Having placed the originals in the automatic document feeder, the original size
is automatically detected and the matching paper tray (if available), selected.
If the original size does not match any available paper size the copier
automatically selects the required reduction or enlargement factor.
This means that the only action required to make a double-sided copy is to
press the start button.
The settings described above are the factory settings for copying as defined by
Océ at delivery. However, the key operator can change any settings to specific
customised settings. These customised settings then become the standard
settings. The standard settings of a print job are the settings specified in the
printer driver for that job.
All settings can be changed as required for each new job. Once a job is
completed and a certain number of seconds (pre-set by the key operator) have
passed, the Océ 3165 returns to initial mode again.