Oce 1010N - B/W Laser Printer, Руководство по эксплуатации

Страница: 92 / 182

Printing from Windows Applications
2-27
4
Enter the page numbers before which you want to insert a page in
the Insert Before Page box. The page number range you can specify
is from 2 to 255. If you want to specify more than one page numbers,
separate them with commas. To specify a range of pages, use a
hyphen between the starting and ending numbers in the range. For
example, to insert separators before pages 5, 11, 12, 13, and 18, type
“
5, 11-13, 18.
”
5
Select the
Print onto Front
check box to print on the separators. Note
that the Print onto Back is not applicable for model FS-1010.
If you check this check box on, each separator sheet is printed with
data reflecting its position in the entire print job. For example, the
separator between pages 9 and 10 will be printed as page 10 when
you select this check box.
6
Select the paper source for the separators from the
Source for Page
drop down list. Note that thick paper, colored paper, etc., should be
loaded on the MP tray.
7
Click the OK button to return to the Print dialog box.
8
Load the paper you want to use for the separator(s) onto the paper
source specified in
step 6
step 6 step 6
step 6
.
9
Click the OK button to start printing.
Transparency Interleaving
This function is available when the current media type is Transparency
and the source is MP Tray (see section 1.4.3 1.4.3 1.4.3 1.4.3 Paper Source Paper Source Paper Source Paper Source on page 1-19 1-19 1-19 1-19 ). It
inserts a blank (or printed) backing sheet between the transparencies to be
printed. You can print the same content of the transparency on the backing
sheet.
Transparency Interleaving cannot be used with either Cover Mode or
Page Insert.
Note