28
- GB -
Repeat the whole procedure if you need to programme the new programme, or press
to return to
the main menu.
The next step in the main menu is programming the clock. This can be done by pressing the
to
make changes, using the
to set the required values and then confirming by pressing the
key. You can set the day, hour and minutes in sequence. Obviously, the set time and day are those that
the programming will refer to.
Display during Operation
Display during Setting (MODE key)
Weekly
F
F
F
Mon
Lev Stop 12.01
Operating mode
•
Weekly timer
Alarms and statuses
•
Lev = Level alarm
•
Flw = Flow alarm
•
Mem = Memory alarm
FLOW
sensor
status
•
Day of the week
Displays the quantity during
dosages
Pump status
•
Empty = pump in start
•
Stop = pump stationary
•
Paus = pump in pause
Time
•
Displays hours
and minutes
P01:START Mon
14.40 12.01
Operating mode
•
Displays in sequence:
programme number, activation
time, quantity, dosage time,
relay status.
•
Day of the
week
Time
•
Displays hours and minutes
Pos: 76 /Alle Produkte/Dummy_module/===== Seitenwechsel ===== @ 0\mod_1125648978015_0.doc @ 1631 @