33
- GB -
Pos: 89 /Gartentechnik/KDS Anlage TEKNA/Absatz 10 @ 12\mod_1253695415437_121.doc @ 75472 @
15.
Paragraph 10 – Level Alarm
Programming
Operation
-
-
Alarm Level
Alarm Flow
Alarms
Level Stop
Alarms
Level Alarm
Stop
Alarm
PROG
-
-
-
ESC
This makes it possible to set the pump when the level sensor alarm
is activated. In other words you can decide whether to stop dosage
(Stop) or simply activate the alarm signal without stopping dosage.
Changes can be made by pressing the
key, then using the
keys to set the alarm type. Confirm by pressing the
key. Press
to return to the main menu
Pos: 90 /Gartentechnik/KDS Anlage TEKNA/Absatz 11 @ 12\mod_1253695494592_121.doc @ 75499 @
16.
Paragraph 11 – Flow Display Unit
Programming
Operation
-
-
Unit
Unit
Unit
Standard
Standard <-
L/h
PROG
-
-
+
-
measurement on the display.
Changes can be made by pressing the
key, then using the
keys to set the unit of measurement, choosing between
L/h (litres/hour), Gph (Gallons/hour), ml/m (millilitres/minute) or
standard (% or frequency, depending on settings). Press
to
confirm and return to the main menu
Pos: 91 /Gartentechnik/KDS Anlage TEKNA/Absatz 12 @ 12\mod_1253695534670_121.doc @ 75526 @
17.
Paragraph 12 – Setting the Pause
Programming
Operation
-
-
Paus
N.Aperto
PROG
+
-
Configurazione
+
The pump can be paused by remote input.
The factory setting is Normally Open.
Changes can be made by pressing the
key, then using the
keys to set the new value ( N. OPEN or N. CLOSED).
Press
to confirm and return to the main menu.
Pos: 92 /Alle Produkte/Dummy_module/===== Seitenwechsel ===== @ 0\mod_1125648978015_0.doc @ 1631 @