O-Mac MS 2700, Руководство оператора

Страница: 42 / 88

42
eliminate possible damage due to high levels
of noise and stress from vibration; maintain
the machine well, wear ear protection
devices, and take breaks whilst working.
• Prolonged exposure to vibrations can
cause injuries and neurovascular disorders
(also called “Raynaud’s syndrome” or “white
finger”), especially to people suffering from
circulation disorders. The symptoms can
regard the hands, wrists and fingers and
are shown through loss of sensitivity, torpor,
itching, pain and discolouring of or structural
changes to the skin. These effects can be
worsened by low ambient temperatures and/
or by gripping the hand grips excessively
tightly. If the symptoms occur, the length of
time the machine is used must be reduced
and a doctor consulted.
Restrictions of use
• Do not use the machine if you are unable
to hold it with both hands or keep steady on
your legs whilst working.
• Never use the machine with damaged,
missing or incorrectly positioned guards.
• Do not change the engine adjustments,
or exceed the maximum rpm. If the engine is
forced to run at an excessive speed, the risk
of personal injury increases.
• Do not strain the machine too much and do
not use a small machine for heavy-duty work;
if you use the right machine, you will reduce
the risk of hazards and improve the quality of
your work.
2.4 Maintenance, storage and transport
Ensure regular maintenance and correct
storage to maintain machine safety and high
performance levels.
Never use the machine with worn or
damaged parts. Faulty or worn-out parts
must always be replaced and never repaired.
Only use original parts: using parts that are
not original or installed incorrectly affects
machine safety, and can therefore cause
accidents or personal injury and relieve the
Manufacturer of all obligations and liability.
Maintenance
• To reduce the risk of fire, check for oil and/
or fuel leaks on a regular basis.
• Be careful during adjustment of the
machine to prevent entrapment of the fingers
between moving parts of the cutting means
and fixed parts of the machine.
Storage
• Do not store the machine with fuel in the
tank in an area where fuel vapours could
reach a naked flame, spark or strong source
of heat.
• To reduce fire risks, do not leave containers
with debris inside a room.
2.5 Environmental protection
Protecting the environment must be a
significant and top priority for machine use,
to the benefit of civil co-habitation and of the
environment that we live in.
• Avoid being an element of disturbance to
the surrounding area. Use this machine at
reasonable times of the day only (not early
morning or late evening when the noise could
cause disturbance).
• Adhere strictly to the local regulations
governing the disposal of packaging, oil,
fuel, filters, damaged parts or any other
element which may have an impact on the
environment; this waste must not be disposed
of with regular waste, but must be separated
and taken to collection centres, which will
recycle the materials.