NXP Semiconductors UJA116 A Series, Руководство пользователя, Страница: 37 / 56

NXP Semiconductors
UM11379
UJA116xA evaluation boards
6.4.3 SPI speed selection
The SPI speed (frequency) can be specified in the lower-left section of the FlexGUI
window (if that section of the window is not visible, click the slider symbol under the 'File'
menu).
6.4.4 Interactive control of the RGB LED on the microcontroller board
Select the Pins tab in the FlexGUI window to access the drop-down window shown in
Figure 31 . This window contains selection boxes for the microcontroller pins that control
the red, green and blue color components of the RGB LED on the microcontroller board.
A 'Low' value selects a component; a 'High' value turns it off.
Figure 31. Interactive control of the RGB LED on the microcontroller board
6.4.5 Register map
When the FlexGUI window opens, the 'Script editor' tab is selected by default. Click on
the tab to the right to display the register map of the selected board. Device registers can
be read or written to interactively via this window.
UM11379 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
User manual Rev. 1 — 23 April 2021
37 / 56