NXP Semiconductors
UM11697
RDGD31603PSMKEVM three-phase inverter kit
Important notice
NXP provides the enclosed product(s) under the following conditions:
This reference design is intended for use of ENGINEERING DEVELOPMENT OR
EVALUATION PURPOSES ONLY. It is provided as a sample IC pre-soldered to a printed
circuit board to make it easier to access inputs, outputs, and supply terminals. This
reference design may be used with any development system or other source of I/O
signals by simply connecting it to the host MCU or computer board via off-the-shelf
cables. The final device in an application will be heavily dependent on proper printed
circuit board layout and heat sinking design, as well as attention to supply filtering,
transient suppression, and I/O signal quality.
The goods provided may not be complete in terms of required design, marketing, and/
or manufacturing related protective considerations, including product safety measures
typically found in the end product incorporating the goods. Due to the open construction
of the product, it is the user's responsibility to take any and all appropriate precautions
with regard to electrostatic discharge. In order to minimize risks associated with the
customer's applications, adequate design and operating safeguards must be provided
by the customer to minimize inherent or procedural hazards. For any safety concerns,
contact NXP sales and technical support services.
UM11697
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 1 — 10 December 2021
3 / 39