RDAIRPABPSI5UG , Rev. 2.0
38
Freescale Semiconductor, Inc.
Installing the Software and Setting up the Hardware
•
Squib_StatV1diagV1 - firing supply voltage status - VDIAG_V1 voltage on the VDIAG1 pin
•
Squib_StatV1diagV2 - firing supply voltage status - VDIAG_V2 voltage on the VDIAG1 pin
•
Squib_StatV1diagV3 - firing supply voltage status - VDIAG_V3 voltage on the VDIAG1 pin
•
Squib_StatV1diagV4 - firing supply voltage status - VDIAG_V4 voltage on the VDIAG1 pin
•
Squib_StatV2diagV1 - firing supply voltage status - VDIAG_V1 voltage on the VDIAG2 pin
•
Squib_StatV2diagV2 - firing supply voltage status - VDIAG_V2 voltage on the VDIAG2 pin
•
Squib_StatV2diagV3 - firing supply voltage status - VDIAG_V3 voltage on the VDIAG2 pin
•
Squib_StatV2diagV4 - firing supply voltage status - VDIAG_V4 voltage on the VDIAG2 pin
•
Squib_StatFen1 - status of the FEN_1 arming input pin
•
Squib_StatFen2 - status of the FEN_2 arming input pin
•
Squib_StatFen1Latch - FEN1 latch status
•
Squib_StatFen2Latch - FEN2 latch status
•
Squib_StatRdiag - reports status of the R_DIAG resistor
•
Squib_StatRlimit1 - reports the R_LIMIT_1 resistor value - reference currents derived by the R_LIMIT_1 and
R_LIMIT_2 resistors
•
Squib_StatRlimit2 - reports the R_LIMIT_2 resistor value - reference currents derived by the R_LIMIT_1 and
R_LIMIT_2 resistors
•
Squib_DeviceType - identifier the squib IC as a four- or two-channel squib driver IC
•
Squib_StatVfireRtn1 - reports the resistance on the VFIRE_RTN1 pin for open pin connections
•
Squib_StatVfireRtn2 - reports the resistance on the VFIRE_RTN2 pin for open pin connections
•
Squib_Stat1AResistance - Squib 1A resistance value
•
Squib_Stat1BResistance - Squib 1B resistance value
•
Squib_Stat2AResistance - Squib 2A resistance value
•
Squib_Stat2BResistance - Squib 2B resistance value
•
Squib_Stat1ALoopsShorts - reports shorts between 1A squib lines and other firing loops
•
Squib_Stat1BLoopsShorts - reports shorts between 1B squib lines and other firing loops
•
Squib_Stat2ALoopsShorts - reports shorts between 2A squib lines and other firing loops
•
Squib_Stat2BLoopsShorts - reports shorts between 2B squib lines and other firing loops
•
Squib_Stat1ALoopsShortsAddIC - reports shorts between squib 1A loop and other loops on additional ICs
•
Squib_Stat1BLoopsShortsAddIC - reports shorts between squib 1B loop and other loops on additional ICs
•
Squib_Stat2ALoopsShortsAddIC - reports shorts between squib 2A loop and other loops on additional ICs
•
Squib_Stat2BLoopsShortsAddIC - reports shorts between squib 2Bloop and other loops on additional ICs
Parameters of the Squib_Fire API function:
•
Spi_Channel (Squib_SpiChannelType) - logical SPI channel number (not physical SPI channel)
•
Squib_Fire (Squib_FireType) - firing commands for squibs pairs or for separate Low/High-side
Parameters of the Squib_ProgramCmd API function:
•
Spi_Channel (Squib_SpiChannelType) - logical SPI channel number (not physical SPI channel)
•
Command (Squib_ProgCmdType) - Squib command
•
Data (unit8) - data
•
Delay (unit8) - Squib diagnostic delay time
•
SpiResponse (unit8) - response to the sent command