NXP Semiconductors QorIQ LS1028A Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 112

NXP Semiconductors QorIQ LS1028A Скачать руководство пользователя страница 112

How To Reach Us

Home Page:

Web Support:

nxp.com/support

Information in this document is provided solely to enable system and software implementers to

use NXP products. There are no express or implied copyright licenses granted hereunder to

design or fabricate any integrated circuits based on the information in this document. NXP

reserves the right to make changes without further notice to any products herein.

NXP makes no warranty, representation, or guarantee regarding the suitability of its products for

any particular purpose, nor does NXP assume any liability arising out of the application or use

of any product or circuit, and specifically disclaims any and all liability, including without limitation

consequential or incidental damages. “Typical” parameters that may be provided in NXP data

sheets and/or specifications can and do vary in different applications, and actual performance

may vary over time. All operating parameters, including “typicals,” must be validated for each

customer application by customer's technical experts. NXP does not convey any license under

its patent rights nor the rights of others. NXP sells products pursuant to standard terms and

conditions of sale, which can be found at the following address:

SalesTermsandConditions

.

While NXP has implemented advanced security features, all products may be subject to

unidentified vulnerabilities. Customers are responsible for the design and operation of their

applications and products to reduce the effect of these vulnerabilities on customer’s applications

and products, and NXP accepts no liability for any vulnerability that is discovered. Customers

should implement appropriate design and operating safeguards to minimize the risks associated

with their applications and products.

NXP, the NXP logo, Freescale, the Freescale logo, and QorIQ are trademarks of NXP B.V. All
other product or service names are the property of their respective owners. ARM, Cortex are
registered trademarks of ARM Limited (or its subsidiaries) in the US and/or elsewhere. The
related technology may be protected by any or all of patents, copyrights, designs and trade
secrets.

©

NXP B.V. 2018.

All rights reserved.

For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]

Date of release: 11/2018

Document identifier: LS1028ARDBRM

«
...
110
111
112

Содержание QorIQ LS1028A

















































































































Отзывы:

Нет отзывов