NXP Semiconductors
KTFRDMMC36XSDEVBUG
FRDM-MC36XSD-EVB evaluation board
KTFRDMMC36XSDEVBUG
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2016. All rights reserved
User guide
Rev. 1.0 — 30 August 2016
4 / 34
4 Getting started
4.1 Kit contents/packing list
The FRDM-MC36XSD-EVB contents include:
•
Assembled and tested evaluation board/module in anti-static bag
•
Quick start guide
4.2 Jump start
NXP’s analog product development boards provide an easy-to-use platform for
evaluating NXP products. The boards support a range of analog, mixed-signal and power
solutions. They incorporate monolithic ICs and system-in-package devices that use
proven high-volume SMARTMOS technology. NXP products offer longer battery life, a
smaller form factor, reduced component counts, lower cost and improved performance in
powering state of the art systems.
1. Go to
http://www.nxp.com/FRDM-MC36XSD-EVB
.
2. Review your Tools Summary Page.
3. Locate and click:
4. Download the documents, software and other information.
Once the files are downloaded, review the user guide in the bundle. The user guide
includes setup instructions, BOM and schematics. Jump start bundles are available on
each tool summary page with the most relevant and current information. The information
includes everything needed for design.
4.3 Required equipment
This kit requires the following items:
•
3/16" blade screwdriver for connecting the cables
•
DC power supply: 5.0 V to 36 V with up to 20 A current handling capability, depending
on motor requirements
•
Typical loads (DC motor, bulbs, power resistors or inductive load with 20 A and 36 V
max operation)
•
One of the following hardware for SPI communication, configuration and control:
–
FRDM-KL25Z Freedom Development Platform
–
Raspberry Pi 2 Model B
–
RloTboard
This board is also compatible with Arduino
™
Uno and Leonardo but no drivers are
provided for this hardware.