NXP Semiconductors FRDM-MC36XSD-EVB, Руководство пользователя, Страница: 27 / 35

NXP Semiconductors
KTFRDMMC36XSDEVBUG
FRDM-MC36XSD-EVB evaluation board
KTFRDMMC36XSDEVBUG All information provided in this document is subject to legal disclaimers. © NXP B.V. 2016. All rights reserved
User guide Rev. 1.0 — 30 August 2016
27 / 34
RIoTboard FRDM-MC36XSD-EVB
Header Pin Hardware
name
Header Pin Hardware
name
Description
19 GPIO5_06 19 — No connection
20 CSPI2_CS0 20 — No connection
21 GPIO5_07 21 — No connection
22 CSPI2_CLK 22 — No connection
23 GPIO5_08 23 — No connection
24 UART3_RXD 24 — No connection
25 GPIO4_26 25 — No connection
26 UART3_TXD 26 — No connection
27 GPIO4_27 27 — No connection
28 UART4_RXD 28 — No connection
29 CSPI3_RDY 29 — No connection
30 UART4_TXD 30 — No connection
31 I2C3_SCL 31 — No connection
32 UART5_RXD 32 — No connection
33 I2C3_SDA 33 — No connection
34 UART5_TXD 34 — No connection
35 I2C4_SCL 35 — No connection
36 PWM1 36 — No connection
37 I2C4_SDA 37 — No connection
38 PWM2 38 — No connection
39 GND 39 Gnd Gnd
40 PWM3 40 CLOCK Input clock
8.2 Setting up the RIoTboard software
The procedure for setting up the software that supports using the FRDM-MC36XSD-EVB
with a RIoTboard is as follows:
1. Go to the Tool Summary Page at
http://www.nxp.com/FRDM-MC36XSD-EVB
and click on the Jump Start icon. Locate and download the zip file named
tools_SVN2487(2016-1-22).zip . Unzip the file to a location on the host PC.
2. Connect a 5.0 V DC power supply to the RIoTboard.
3. Connect one end of a Mini USB cable to the USB OTG interface on the RIoTboard.
Connect the other end of the cable to the host PC.
4. Power down the board and set the boot switch (SW1) on the RIoTboard to serial
download mode, as shown below: