EVB9S08DZ60 User's Manual
Page 7
2 Hardware Features
2.1 Evaluation Board Features
The EVB9S08DZ60 board features:
1.
An “MCU” section containing:
A MC9S08DZ60 microcontroller (in 64-pin LQFP package, already programmed
with a demo application);
A clock module, a crystal oscillator, and a connector for providing an external clock
source, together with jumpers to select the clock source;
A BDM connector for in-circuit debugging/programming with an external
instrument;
Four header connectors with all of the MCU signals.
2.
A power supply section containing:
A 12 V DC barrel input connector (2.1 mm);
Two banana input connectors (12 V DC and GND);
A power on/off switch.
3.
A built-in “USB TO BDM INTERFACE” section which allows the host PC to
communicate with the microcontroller through a standard USB interface.
4.
An “INPUTS” section containing:
A Reset push-button;
Four additional push-button;
Two potentiometers;
Eight dip-switches;
A series of jumpers to connect/disconnect the above controls to/from the
microcontroller.
5.
An “OUTPUTS” section containing ten LEDs together with the relative jumpers to
connect/disconnect them to/from the microcontroller.
6.
A “CAN” section containing a CAN connector with two CAN transceivers (high speed
and single wire) together with a series of jumpers to select the CAN physical layer to be
used.