EVB9S08DZ60 User's Manual
Page 11
4 Hardware Setup
4.1 First Connection
The Evaluation Board is connected to a host PC through a USB port. Connection steps are
listed below in the recommended flow order:
1.
Install all the required system software as described in the previous section.
2.
Power the board through either the barrel connector or the banana connectors.
3.
Make sure the “ON-OFF” switch is in the “ON” position. The “POWER” LED will turn on.
4.
Insert one end of the USB cable into a free USB port of the PC.
5.
Insert the other end of the USB cable into the USB connector on the Evaluation Board.
6.
The first time the Evaluation Board is connected to the PC, Windows recognizes the
instrument and starts the
“Found New Hardware Wizard”
procedure, asking you to
specify the driver to use for the instrument. On Windows XP (SP2) the following dialog
box will appear.
Select the
“No, not this time”
option and click the
“Next >”
button.
7.
The following dialog box will appear.