EVB9S08DZ60 User's Manual
Page 23
7.2 Daughter Board Jumpers
Name Reference
Description/Pinout
J105
2
4
1
3
6
5
OSCILLATOR SOURCE
1-3, 2-4 (“CRYSTAL/CLOCK”): Oscillator source is either
the clock module or the
crystal present on the
daughter board (default)
3-5, 4-6 (“AUX”):
Oscillator source is taken
from the “EXT OSC”
connector (in the Mother
Board)
J106
CLOCK ENABLE
Installed:
Connects the clock module’s OUT pin to
pin 3 of the “OSC SOURCE”(default)
Not Installed:
Disconnects the clock module’s OUT pin
from pin 3 of the “OSC SOURCE”
J107
VDD ENABLE
Installed:
The microcontroller’s VDD lines are
supplied with a 5 V DC voltage (default)
Not Installed:
The microcontroller’s VDD lines are floating
J108
GND ENABLE
Installed:
The microcontroller’s GND lines are tied
to GND (default)
Not Installed:
The microcontroller’s GND lines are floating