Jumper and Connector Settings
Page 20
Name Reference
Description/Pinout
J204
1
DIP-SWITCH ENABLE
Installed:
The DIP-switches are connected to the
PTB[7..0] ports of the microcontroller
(default)
Not Installed:
The DIP-switches are not connected to the
microcontroller.
J205
POTENTIOMETER “PTA1” ENABLE
Installed:
The “PTA1” potentiomenter is
connected to the microcontroller’s PTA1
line (default)
Not Installed:
The “PTA1” potentiomenter is not
connected to the microcontroller’s PTA1
line
J206
POTENTIOMETER “PTA2” ENABLE
Installed:
The “PTA2” potentiomenter is
connected to the microcontroller’s PTA2
line (default)
Not Installed:
The “PTA2” potentiomenter is not
connected to the microcontroller’s PTA2
line
J207
PUSH-BUTTON “PTA4” ENABLE
Installed:
The “PTA4” push-button is connected to
the microcontroller’s PTA4 line (default)
Not Installed:
The “PTA4” push-button is not connected to
the microcontroller’s PTA4 line
J208
PUSH-BUTTON “PTA5” ENABLE
Installed:
The “PTA5” push-button is connected to
the microcontroller’s PTA5 line (default)
Not Installed:
The “PTA5” push-button is not connected to
the microcontroller’s PTA5 line
J209
PUSH-BUTTON “PTA6” ENABLE
Installed:
The “PTA6” push-button is connected to
the microcontroller’s PTA6 line (default)
Not Installed:
The “PTA6” push-button is not connected to
the microcontroller’s PTA6 line
J210
PUSH-BUTTON “PTA7” ENABLE
Installed:
The “PTA7” push-button is connected to
the microcontroller’s PTA7 line (default)
Not Installed:
The “PTA7” push-button is not connected to
the microcontroller’s PTA7 line