EVB9S08DZ60 User's Manual
Page 9
3 Software Setup
3.1 Overview
i
Note
:
before connecting the Evaluation Board to the PC, it is
recommended that you install all of the required software first (see
below), so that the appropriate USB driver will be automatically found by
Windows when you connect the Evaluation Board.
The Evaluation Board requires that both CodeWarrior Development Studio and SofTec
Microsystems Additional Components be installed in the host PC.
i
Note: CodeWarrior Development Studio must be installed first.
3.2 Host System Requirements
The Evaluation Board is controlled by CodeWarrior Development Studio. The following
hardware and software are required to run the CodeWarrior user interface together with the
Evaluation Board:
A 200-MHz (or higher) PC compatible system running Windows 98, Windows 2000 or
Windows XP;
128 MB of available system RAM plus 1 GB of available hard disk space;
A USB port;
CD-ROM drive for installation.
3.3 Installing CodeWarrior Development Studio
To install the CodeWarrior Development Studio, insert the CodeWarrior CD-ROM into your
computer’s CD-ROM drive. A startup window will automatically appear. Follow the on-screen
instructions.