EVB9S08DZ60 User's Manual
Page 15
5 Operating Modes
5.1 Overview
The Evaluation Board can work in two modes: “standalone” mode and “host” mode.
5.2 Standalone Mode
In standalone mode, no PC connection is required. The microcontroller is factory programmed
with a sample application.
To run the built-in example:
Ensure that the board is powered on.
Ensure that all of the jumpers in the “INPUTS” and “OUTPUTS” sections are inserted.
Press the “PTA4” push-button. The value of the “PTA1” potentiometer will be displayed
on the “PTDx” LEDs.
Press the “PTA5” push-button. The value of the “PTA2” potentiometer will be displayed
on the “PTDx” LEDs.
Press the “PTA6” push-button. The “USER LED 2” LED will turn on if the value of the
“PTA2” potentiometer is greater than the value of the “PTA1” potentiometer, off
otherwise.
Press the “PTA7” push-button. The value of the “PTBx” DIP-switches will be displayed
on the “PTDx” LEDs.
5.3 Host Mode
In host mode the program execution is controlled by the host PC through the “USB” connector.
You can use the PC to debug the application by, for example, executing the program step by
step and watching how the microcontroller registers vary, using the provided CodeWarrior
Development Studio.