NXP Semiconductors ADC1112D Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 41

NXP Semiconductors ADC1112D Series Скачать руководство пользователя страница 8

NXP Semiconductors

Quick start ADC1412D, ADC1212D, ADC1112D series

Quick start

QS_ADC1412D_7.doc

© NXP B.V. 2010. All rights reserved.

Quick start

Rev. 7 — 6 August 2010

8 of 41

1.8 SPI program

1.8.1 Main application

The SPI program allows the user to control the ADC1412D, ADC1212D and ADC1112D
device. First, run the application “Andromeda.exe”, this will display the following window:

Fig 4. SPI main window: detection of device

If the program does not detect any device, follow the instructions shown to you.

When the program detects the device connected to your PC, it will display the following
screen (It automatically detects the resolution):

Fig 5. SPI main window: successfully detect ADC1412D series

The main application will display the panel to drive the ADC1412D as described in the
following section.

All devices ADC1412D, ADC1212D or ADC1112D series can be controlled in same way.
The following shows only example for ADC1412D series, however everything is
compliant to other devices.

1.8.2 ADC1412D driver application

The panel driver for the ADC1412D series has 6 pages dedicated to various purposes.

The button “QUIT” will close the driver application (refer to as ADC1x1x.vi in window title)
and turn off the main application. To restart the application, click on the arrow.

«
...
6
7
8
9
10
...
»

Содержание ADC1112D Series










































Отзывы:

Нет отзывов