NXP Semiconductors ADC1112D Series Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 41

NXP Semiconductors ADC1112D Series Скачать руководство пользователя страница 28

NXP Semiconductors

Quick start ADC1412D, ADC1212D, ADC1112D series

Quick start

QS_ADC1412D_7.doc

© NXP B.V. 2010. All rights reserved.

Quick start

Rev. 7 — 6 August 2010

28 of 41

Fig 28. “USB Configurator” window: DATA clock configuration

The FPGA configuration indicates which configuration file has been programmed in
FPGA, in the example shown it is the rising edge of the clock on port P2.

In the directory “\5. CGAP Software\Config” of the CD, there are 2 configurations files
that already defines frequencies for the DFS and AFS (AQM clock configuration that we
don’t use here). Copy these files to the directory “C:\Documents and Settings\All
Users\Application Data\Electronique Concept\UsbConfig” to get access to these
frequencies.

Select “LMK03001 125 MHz – 125 MHz (125.000 MHz)” to define the frequency to be
125 MHz. The pattern will be acquired as this sampling rate, meaning 125 MHz CMOS or
125 MHz LVDS DDR on P2 connector depending on the bin flash used.

Click “Update”, this should display 6 green check boxes and the value of the
corresponding frequency being actually generated by the board.

If one or several red cross appear, check that the clock signal coming from P1 (or P2) is
correctly provided to the board.

The Data Phase Shift allows the user to shift the clock position wrt data by the amount of
time indicated.

Note: you can edit the LMK file by clicking on the “Edit…” button to define your own
frequency, as long as you respect the frequency range defined by the PLL. For other
frequencies to generate, please contact

[email protected]

for more

details.

3.5 HSDC extension module: pattern acquisition

The clock frequency is defined, and the board is ready to acquire the pattern.

3.5.1 Acquisition in CMOS mode

Depending on the resolution tested, there are various configurations that we recommend
to follow to get correct results.

In order to do the acquisition, the number of samples needs to be filled in the Pattern size
field: this number is a power of 2 with a maximum of 8MB.

Select one-shot mode and source P1 to acquire data (see

figure 29

,

figure 30

or

figure

31

).

«
...
26
27
28
29
30
...
»

Содержание ADC1112D Series










































Отзывы:

Нет отзывов