NXP Semiconductors ADC1112D Series Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 41

NXP Semiconductors ADC1112D Series Скачать руководство пользователя страница 27

NXP Semiconductors

Quick start ADC1412D, ADC1212D, ADC1112D series

Quick start

QS_ADC1412D_7.doc

© NXP B.V. 2010. All rights reserved.

Quick start

Rev. 7 — 6 August 2010

27 of 41

3.3 HSDC extension module: FPGA flash

To get access to the software control of the generation system, run the “USB
Configurator.exe”. It is located by default in the directory "C:\Program Files\Electronique
Concept\USB Configurator\".

If a HSDC extension module is connected to the user system it will display the following
window:

Fig 27. “USB Configurator” window: board main control

This window gives an overview of the current status of the board connected. If supply is
not connected, a FAIL status appears on the Power status field.

Flash the FPGA with the appropriate bin file provided on the CD located at “\5. CGAP
Software\Install\CGAP FPGA bin v03”. Among the 8 files, 2 are considered here:

•

“cgap_v03_P1C_RE_3V3_GEN.bin”: the FPGA will use the rising edge of the clock

delivered by the P1 connector. This is suitable when using CMOS use case;

•

“cgap_v03_P2C_RE_3V3_ACQ.bin”: the FPGA will use the rising edge of the clock

delivered by the P1 connector. This is suitable when using LVDS use case;

For further details regarding the others file please contact

dataconverter-

[email protected]

.

Browse to select the wanted bin file. Click “Erase” and “Program” buttons. Once the
“Successful” message appears, click “Reset FPGA” button: board is programmed.

3.4 HSDC extension module: DATA clock configuration

To acquire the digital input pattern on P1/P2 connector (CMOS or LVDS DDR mode), the
user needs to choose the wanted frequency. In our example, the frequency used for
acquisition is 125 MHz:

«
...
25
26
27
28
29
...
»

Содержание ADC1112D Series










































Отзывы:

Нет отзывов