12
Network Camera User Manual
Brightness
: Set the brightness level of the camera image.
Contrast
: Set the color difference between the brightest and darkest parts.
Hue
: Set the total color degree of the image.
Saturation
: Set the degree of color purity. The purer the color is, the brighter the image is.
WDR
: WDR can adjust the camera to provide a better image when there are both very bright
and very dark areas simultaneously in the field of the view by lowering the brightness of the
bright area and increasing the brightness of the dark area. Recording will be stopped for a few
seconds while the mode is changing from non-WDR to WDR mode.
Sharpness
: Set the resolution level of the image plane and the sharpness level of the image
edge.
Noise Reduction
: Decrease the noise and make the image more thorough. Increasing the value
will make the noise reduction effect better but it will reduce the image resolution.
Defog:
Activating
this function and setting an appropriate value as needed in foggy, dusty,
smoggy or rainy environment to get clear images.
Backlight Compensation
:
⚫
Off: disables the backlight compensation function. It is the default mode.
⚫
HLC: lowers the brightness of the entire image by suppressing the brightness of the image’s
bright area and reducing the size of the halo area.
⚫
BLC: If enabled, the auto exposure will activate according to the scene so that the object of
the image in the darkest area will be seen clearly.
Antiflicker
:
⚫
Off: disables the anti-flicker function. This is used mostly in outdoor installations.
⚫
50Hz: reduces flicker in 50Hz lighting conditions.
