36
Network Camera User Manual
6. Click the “OK” button to save the settings.
Note
: To change the access level of a user, the user must be deleted and added again with the
new access level.
Delete user:
1. Select the user to be deleted in the user configuration list box.
2. Click the “Delete” button to delete the user.
Note
: The default administrator account cannot be deleted.
4.6.2
Online User
Go to Config
→
Security
→
Online User. View the user who is viewing the live video.
An administrator user can kick out all the other users (including other administrators). Once the
user is kicked out, it will be added into the block list.
4.6.3
Block and Allow Lists
Go to Config
→
Security
→
Block and Allow Lists as shown below.
The setup steps are as follows:
Check the “Enable address filtering” check box.
Select “Block/Allow the following address”, IPv4/IPv6/MAC and then enter IP address or
MAC address in the address box and click the “Add” button.
4.6.4
Security Management
Go to Config
→
Security
→
Security Management as shown below.
