33
1. Each block can be individually turned active or inactive for motion detection. Using
the arrow keys (
q
/
p
/
t
/
u
) on your OSD Controller, navigate to any area of the
screen then press the [SET] keys to bring up the sub-menu.
2. Select that particular block active or inactive, or scroll down to ‘SET ALL BLOCK’ or
‘CLEAR ALL BLOCK’ to active or deactivate the entire grid.
3. Scroll down to ‘SAVE & EXIT’ and press the [
u
] right key once all the desire areas of
the grid have been activated to save changes and exit.
SELECT MODE
MOVE
SET
CLEAR
SET ALL BLOCK
CLEAR ALL BLOCK
SAVE & EXIT
OSD Menu Terms & Settings
