25
OSD Menu Terms & Settings
3.2 BLC LEVEL (0-9)
The BLC level can be adjusted in the ‘BLC-F’ (Fixed) mode only. The level ranges from
1-9.
3.3 BLC AREA (0-9)
The BLC area can be adjusted in the ‘BLC-F’ mode only. Each area is 1/9th of the screen
size. The default position is at the center (Area 5) when activated.
3.4 ATR - Adaptive Tone Reproduction (ON, OFF)
The ATR feature improves the visibility of the entire picture by providing the optimum gra
-
dation compensation for the image with both low-luminance areas and high-luminance
areas existing in the same picture.
• OFF:
ATR is OFF.
• ON:
ATR is ON.
4. SPECIAL
The Special Setup is used to control the SHARPNESS, DNR, NEGATIVE, HOR.
REVERSE, and FACTORY DEFAULT of the EasyView™ 2 dome camera.
4.1 SHARPNESS (1~16)
Increasing this value sharpens the object edges. A setting too high produces noise and
can potentially obscure the image.
SHARPNESS
DNR
NEGATIVE
HOR. REVERSE
FACTORY DEFAULT
RETURN
SAVE & EXIT
SPECIAL SETUP
07
2D-H
OFF
OFF
