31
6.6.1 IR CONTROL
(AUTO, MANUAL)
• AUTO:
The IR intensity is automatically controlled.
• MANUAL:
The IR intensity is controlled according to the LINE-1 AND LINE-2 threshold.
6.6.2 LINE-1, LINE-2 (Manual mode only)
This function is used to manually control the intensity of the IR LEDs.
• LINE-1:
Controls the outer most ring of LEDs. Setting 0 indicated that the LEDs have
been turned OFF, and setting 22 indicates the LEDs are at its most intense.
• LINE-2:
Controls the inner most ring of LEDs. Setting 0 indicated that the LEDs have
been turned OFF, and setting 22 indicates the LEDs are at its most intense.
6.6.3 SATURATION
(6-15)
This feature determines threshold of the IR illumination intensity before it automatically
compensates for the overexposure. Higher the value, lesser the tolerance it will have
before compensation.
6.6.4 MIN. LEVEL
(1-10)
This feature sets the minimum IR illumination intensity. For best result, observe the differ
-
ence changing the value makes while viewing the effects on the service monitor.
OSD Menu Terms & Settings
IR CONTROL
LINE-1
LINE-2
SATURATION
MIN. LEVEL
RETURN
SAVE & EXIT
IR LED SETUP
AUTO
-
-
09
01
