Navigate to the
Stack Status
tab. This tab will show all the stacks which have connected or remain
disconnected. An operator can monitor the stack voltages of the connected stacks while the PCS is
charging/discharging the pack. As the pack voltage changes the unconnected stacks will begin to
meet the pack connection criteria and these stacks would then be automatically connected.
One or more stacks may be in faulted state and cannot be connected. The
Stack Status
page allows
the monitoring and identification of these faulted stacks. Refer to
for details on how to
address stack faults.
Nuvation Energy Battery Control Panel - Product Manual
Document ID: NE-PM-005
29
Rev 1.1, 2020-10-14
Curie Update 2
