Nuvair 8060, Руководство пользователя, Страница: 26 / 40

Open Vertical Electric
26
www.nuvair.com
17.0 HP Compressor Filtration - Active Carbon Filter / Molecular Sieve
The HP Compressor comes standard with Triplex filtration, utilizing a single Filter Element. Do NOT
use any substitute. Change filter element per the replacement frequency charts. If the compressor
system is operated in high humidity and/or high temperature, filter elements must be changed more
often. See charts for details on filter element life factors.
1) Shut down the Compressor System
2) Open Manual Bleed Drain Valve on filter towers to drain pressure. Leave valves open.
3) Unscrew the Filter Canister Cap.
4) Remove expended Element from Filter Canister.
5) Install new filter. .
6) Reinstall Cap to Canister.
7) Close Manual Condensate Valve.
Be sure that all pressure has been relieved from the system prior to opening any filtration
canister. Failure to vent pressure from the system prior to opening the canister can lead to
serious personal injury or death. Difficulty turning the filter cap may indicate there still is
pressure in the filter canister.
If the compressor is located in an area where there is high humidity and high heat, the life of
all Filtration Elements may be as little as 35% of rated operating capacity. Check the
Compressor manual and Appendix for details on Filter Element Life Factors.
The active carbon filters are classified as special waste once the compressor has been used to make
air: they must be disposed of in compliance with the anti-pollution standards in force.
Filter Canister Cap
Oil Fill Cap
Manual Pressure
Bleed Drain Valves
HP Filter Replacement
p/n SC000440-MHC