Assembling Your Veggie Bullet
| 25
24 |
Assembling Your Veggie Bullet
SAFETY NOTE:
Check to make
sure that the lid is securely locked
in place and that the push button
on the hinge pin is not pushed in.
S T E P 5 :
To securely close the
SPIRALIZER LID (2D), hook the front safety
clasp over the
LID and press down to LOCK. The POWER INDICATOR
LIGHT will glow
RED
when all pieces are locked and in place.
Press the Power Button to turn the machine
ON and the indicator light
GREEN
. If everything is properly assembled, the Button will glow
GREEN
and the motor will run. If the Button doesn't glow
GREEN
, turn off power
and check your assembly to make sure all pieces are locked and in place.
To
UNLOCK and open the SPIRALIZER LID (2D), first turn OFF the
machine by pressing the Power Button. The
POWER INDICATOR
LIGHT will glow
RED
when the unit is off . Then, pull the bottom arm of
the safety clasp outward to unhook and simply lift lid to open.
S T E P 4 :
Fasten
SPIRALIZER LID (2D)
to the back of the
SPIRALIZER
BASE attachment (2A) by
squeezing the retractable
hinge pin on the back of the
SPIRALIZER BASE (2A) and
holding the
SPIRALIZE LID (2D)
at 90 degree angle.
Interlock the metal hinge on
the
SPIRALIZER LID (2D) with
the back metal hinge pin, then
release the hinge pin and close
the S
PIRALIZER LID (2D) flat
over
SPIRALIZER BLADE (2C).
2C
2B
2A
2A, 2B
S T E P 2 :
Place
SPIRALIZER BASKET
component
(2B) over top of
the center spindle inside of the
SPIRALIZER BASE attachment
(2A). Make sure that the basket
is properly seated in and aligned
with the spokes on the spindle.
S T E P 3 :
Using the circular finger grips,
carefully place the
SPIRALIZER
BLADE (2C) on the SPIRALIZER
BASKET (2B) and set the
rectangular notches into place
on the top of the
SPIRALIZER
BASKET (2B).
90°
2D
SPIRALIZER BLADE DISC IS SHARP!
USE CAUTION WHEN HANDLING!
SAFETY NOTE:
Always
unplug the Veggie Bullet
when not in use.
VEGGIE
SPIRALIZER LID (2D)
SPIRALIZER LID (2D)
SPIRALIZER
SPIRALIZER
(2A)
(2A)
by
by
squeezing the retractable
squeezing the retractable
hinge pin on the back of the
hinge pin on the back of the
SPIRALIZER BASE (2A)
SPIRALIZER BASE (2A)
and
and
holding the
holding the
SPIRALIZE LID (2D)
SPIRALIZE LID (2D)
at 90 degree angle.
at 90 degree angle.
Interlock the metal hinge on
Interlock the metal hinge on
SPIRALIZER LID (2D)
SPIRALIZER LID (2D)
BULLET,
S T E P 5 :
S T E P 5 :
To securely close the
To securely close the
clasp over the
clasp over the
BULLET,
BULLET,
BULLET,
BULLET,
LLC
on the hinge pin is not pushed in.
on the hinge pin is not pushed in.
LLC
LLC
LLC
LLC
Содержание VBR-1001A
Страница 2: ...V E G G I E B U L L E T L L C ...
Страница 3: ...V E G G I E B U L L E T L L C ...
Страница 69: ...V E G G I E B U L L E T L L C ...
Страница 70: ...V E G G I E B U L L E T L L C ...