Nussbaum TOP LIFT TSK 12000 DJ, Руководство по эксплуатации, журнал осмотров

Страница: 21 / 56

Operating Manual and Inspection Book
TOP LIFT TSK 12000 DJ
- 21 -
3.5 Electrical circuit diagram
Grounding according to local regulations
Before commissioning check whether the nominal motor current matches the motor
protection relay.
Check all terminal points for proper connection and that all contact screws are tight.
Before commissioning, check all wiring and controls for proper function. Do not permit
commissioning from the unauthorised side.
These plans were generated on a CAD system. To keep plans to the current state, we
ask that you request Nussbaum to make the changes.
These circuit diagrams are intellectual property. They may not be given to third parties
or reproduced without our permission!
Rights to make changes are retained.
Circuit diagram and switch documents
Circuit diagrams were made to the best of our knowledge. No guarantee is made for
the accuracy of enclosed circuit diagrams and switch plans contained in this docu-
ment. This is particularly relevant for switches that were completed by us according to
third party plans. This was done by us from purchaser provided manufacturer docu-
mentation.
Functional test of switch systems
Circuit diagrams are not standard documents. When checking the control cabinet at
the factory, field devices such as sensors, thermostats and motors cannot be included.
For this reason, even with careful inspection, functional and switch errors
cannot always be prevented.
Deficiencies are removed within the scope of guarantee during commissioning. During
commissioning, if our services are not used, then no deficiency liability is accepted.
Rework, including informing of circuit diagrams of switch systems not commissioned by
us are therefore only done to an invoice according to our service terms and condi-
tions.
Costs for rework by third parties cannot be honoured.