Nussbaum TOP LIFT TSK 12000 DJ, Руководство по эксплуатации, журнал осмотров

Страница: 29 / 56

Operating Manual and Inspection Book
TOP LIFT TSK 12000 DJ
- 29 -
• Lift the vehicle. Push the "Lift" button on the operating unit.
• Check that the swivel arm safety is latched in on all lifting arms.
• Raise the lift to the desired working height.
• The entire lifting process must continuously be observed by the operator.
5.2 Lowering the vehicle
• Inspect the hazardous area. No person or object may stand in the working
area of the lift, or on the lift.
• Place the vehicle at the desired working height by pushing button #4 (fig-
ure 1).
• If you do not move the lift completely down but in a working position:
Lower onto the locks by pushing button #3.

The lift moves down a little and sets down in the next latch

When a vehicle is serviced the lift must be engaged in the latch
• Before starting the lowering process, the lift must be moved out of the latch
again.

Press the “Lift” button #2 briefly to unlock the latch
• Then press button #4 for lowering the lift to the floor
• Swivel the lifting arms into the home position
• Once the lift is at the lowest position, the vehicle can be driven off the lift.