Nussbaum SPL 10 Series, Руководство пользователя

Страница: 6 / 32

TWO POST SPL10000
Nussbaum Automotive Solutions, LP | 1932 Jordache Court, Gastonia, NC 28052 | 704.864.2470 | Email: info@nussbaum-usa.com | us.nussbaumlifts.com
6
•
Only trained personnel are to operate the Lift.
•
No one is to stand within the working area (danger area) during vehicle lifting and lowering operations.
•
No one is to occupy a vehicle during any phase of Lift operation.
•
No one is to climb onto the automotive Lift when in a raised position.
•
The main electrical switch must be switched off and locked out or tagged out according to OSHA Regulations
before maintenance or repair work is performed on the Lift.
•
The operator must continue to observe the vehicle and Lift throughout the lifting or lowering operation.
•
Check the center of gravity of the vehicle if heavy parts, such as the engine are removed.
•
If heavy parts such as the engine must be removed, the center of gravity will change. Secure the vehicle before
removing parts to avoid the possibility of the vehicle becoming insecure.
•
Read all instructions before operating lift.
•
Care must be taken as burns may occur from touching hot parts.
•
Do not operate the Lift with a damaged cord or if the Lift has been damaged – until it has been examined by a
qualified service person.
•
To reduce the risk of fire, do not operate Lift in the vicinity of open containers of flammable liquids (gasoline).
•
Adequate ventilation should be provided when working on operating internal combustion engines.
•
Keep hair, loose clothing, fingers, and all parts of body away from moving parts.
•
Use only as described in this manual. Use only manufacturer’s recommended attachments.
•
ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resistant lenses, they are not safety
glasses.
SAVE THESE INSTRUCTIONS
SAFETY DEVICES
Nussbaum has designed several saftety features into each Lift to ensure safe and efficient operations under a variety
of conditions. Warranties will be voided and dangerous working conditions exist if any of the listed devices are
altered or disabled.
Safety device at the Lift Carry Arms Safety device to prevent unintentional lateral arm movement.
Equalization Equalizer Cables Safety device to prevent “out of level” lifting.
Top Limit Bar and Switch Safety device to prevent unintentional collision with Overhead
Telescope Assembly on Lift.
Raise Button If button is not pressed, the Lift stops moving up.
Safety Ratchets Safety device against unintentional lowering.
Hydraulic Flow Restrictors Safety device to prevent excessive lowering speed.