Nussbaum MCS 5500 ND WIRELESS, Руководство по эксплуатации, Страница: 19 / 57

Operating Instruction and Documentation
MCS 5500 ND WIRELESS
- 19 -
pic 8: Synchronous „lowering“
• Observe the complete process.
• When the lifts are in the lowest position the mobile lifts can be removed. Raise the MCS
with the hand lever (read chapter 5.1).
5.5 Single-Mode „Lifting“
Before dismounting heavy parts (motor, axle, set of gears) check the center of gravity.
Otherwise a malfunction can lead it to damages or leadto danger for body and lives.
It is possible to move the MCS in the single-mode. This is necessary to reach the
different levels of the pick-up points.
pic 9:
Through this measure, it is possible to raise the vehicle horizontally.
• Block the vehicle against rolling, put into gear.
• Position the MCS. Whenn necessary use the additional supports.
• Lower the MCS in the lowest position (with the handlever).
• Check the dangerous places of the lift and be sure that there are no objects or people in
the immediate area of the lift or on the lift.
• Switch on the control system; all the main switch on position ”1” .
• Raise every MCS with the single-mode until the pick-up points of the vehicle are reached.
Turn the plastic cover at the respective operating unit and press the button „lifting“
(single).