21
G
e
tt
ing st
ar
te
d
•
If the battery is exhausted, charge for 2 or 3 minutes before turning the
power on.
1
Press
p
for 2 seconds or longer.
The starting screen appears and then the locked screen (P.21) is
displayed.
•
When the terminal is powered on without the UIM, a message
prompting to attach the UIM appears on the starting screen.
When you turn the power on for the first time
Make the initial settings according to the onscreen instructions (P.24).
2
Drag
to the periphery.
■
Checking the radio wave condition
An icon indicating radio wave reception level appears on the status bar
(P.28).
1
Press
p
for 1 second or longer.
Tablet options screen appears.
2
"Power off".
3
"OK".
The ending screen appears and then the power is off.
You can turn off the screen to prevent the erroneous operation of the touch
screen or buttons.
•
When the screen is turned off with "Timeout" (P.52) set, the screen is
locked automatically after about 5 seconds.
1
Press
p
.
The screen turns off and the screen is locked.
To unlock
Press
p
and drag
to the circle outside.
Notes on using the touch screen
•
Touch screen is designed for being touched lightly with fingers. Do not push
it forcibly with a finger or press it with sharp objects (a nail, ballpoint pen,
pin etc.).
•
Touching the touch screen may not work in the following cases. Note that
it may cause malfunction.
-Operation with gloved hands
-Operation with tip of fingernail
-Operation with a foreign object on the display
-Operation with protective sheet or seal on the display
Turning power ON/OFF
Turning power ON
Turning power OFF
Locking/Unlocking the screen
Information
•
You can also set to require entering pattern/PIN/password in "Configure
lock screen" (P.53), when unlocking.
Basic operation
Using touch screen
Continued to next page
