NTT docomo FOMA D701I, Руководство пользователя

Страница: 58 / 517

55
Makin
g
/R
eceivin
g
Calls
1
Hold down
#
for over a second.
･
Timed pauses can be entered in succession.
･
Each timed pause is followed by a second interval.
･ You cannot make a call if a timed pause is entered at the beginning of the phone number.
Switching from a voice call to a video-phone call
You can switch to a video-phone by operating from the submenu during a voice call when the
other terminal is compatible with switching a call. Switching can be performed only from the
terminal which made the voice call.
･
This operation can be performed during a call between the terminals that support switching between
voice call/video-phone call.
･
To switch to a video-phone call, the other party needs to set Indication ON of Indicate V-phone in
advance.
☛
P91
1
Press
m1
during a voice call and select
YES
.
･
The guidance that the call is switched is played during switching the call.
･
Select NO to return to the voice call talking screen.
･
You can switch to the call using the speakerphone function by pressing
n
while switching the call.
INFORMATION
● Tone signals (DTMF) may not be received depending on the receiving device.
● When it is necessary to send tone signals (DTMF) following voice prompts as in making ticket reservations,
the speakerphone function is useful. In this case, input tone signals (DTMF) after switching to the
speakerphone.
● A subscriber to Call Waiting Service cannot make a call to another party by putting the current call on hold
and entering a pause (P) or timed pause (T).
● When
On-hold
is set in Close Setting, the call is continued even if you close FOMA terminal while sending
tone signals (DTMF). After the tone signals are sent, the call will be put on hold.
INFORMATION
● During packet communication, disconnect the packet communication and switch to a video-phone call.
● When the other party is during packet communication, the call cannot be switched to a video-phone call.
● While talking on the phone using Call Waiting Service, you cannot switch the call to a video-phone call.
● It takes about 5 seconds to switch. In addition, it might take time to switch depending on radio wave conditions.
● A voice call may not be switched to a video-phone call and the connection may be interrupted due to radio
wave conditions.
● The call is not charged while
Modifying
is displayed.
● Switching from a video-phone call to a voice call
☛
P83
● The second call received during switching a call is rejected and recorded in the received call list.
● The speakerphone function is used continuously even if a voice call and video-phone call are switched.
● The settings (such as switching the cameras) during a video-phone call are canceled when a voice call and
a video-phone call are switched.
● According to the call duration of a video-phone call and voice call, the call charges are added, respectively.
* From January 2001, the DoCoMo display beeper name has changed to “QUICKCAST”.