NTT docomo FOMA D701I, Руководство пользователя

Страница: 94 / 517

Making
/Receivin
g
Vid
e
o-pho
ne C
a
lls
91
1
Press
m883
on the stand-by display.
2
Select each item to set.
3
Press
p
.
Setting of switching between a voice call and a video-phone call
Indicate V-phone
Set whether to notify that your terminal can switch between a voice call and a video-phone call to the
other party’s terminal.
･
You cannot change the setting during a voice/video-phone call.
･
The setting cannot be operated in a location outside the service area or where radio waves are hard to
reach. Operate the terminal in locations with good radio wave condition.
1
Press
m8861
on the stand-by display.
■
Deactivating
a
Press
m8862
on the stand-by display.
■ Checking the current setting
a
Press
m8863
on the stand-by display.
Default Voice call auto switch: OFF Display setting: Both Sub screen: Me Display screen size: Large
Send camera image: ON Sending image quality: Normal Display light: Always on (normal)
Voice call auto switch
： Sets whether to redial a voice call automatically when a video-phone call is
not connected.
Display setting
：
Specifies whether to display either your self image or the other party’s
image or both of images during a video-phone call.
･ If you set other than
Both
,
Sub screen
cannot be set.
Sub screen ： Specifies whether to display your self image or the other party’s image on
the sub screen during a video-phone call.
Display screen size
： Sets the main screen view size.
Send camera image
：
Specifies whether to send your self image to the other party.
Sending image quality
： Sets the image quality on the other party’s screen.
Display light
：
Sets the display light during a video-phone call.
･
If you set Terminal settings , it operates according to the setting for Display
Light Setting (
☛
P128).
INFORMATION
● Even when the voice call auto switch function is set to
ON
, redialing may not be performed depending on
the situation of the other party or network.
● When the voice call auto switch function is set to
ON
, if you make a video-phone call during a packet
communication connected to a PC, the call is redialed without connecting to a video-phone call and
connected to a voice call. During a voice call or 64K data communication, the call is not connected to a
video-phone call and redialing is not performed, either.
● If you redial voice calls with the voice call auto switch function set to
ON
, the voice call charge is applied
instead of digital communication charge.
● If a video-phone call is connected, redialing to a voice call is not performed.
Default Indication ON: active
Next