NTI RACKMUX-V17-N-8USBHD-IP RACKMOUNT DRAWER WITH USB KVM SWITCH AND KVM ON IP
53
SAFETY
This NTI product has been designed and fully tested with user safety of the utmost importance. As with all electronic devices, this
NTI product should be handled and operated with care. In order to avoid possible injury and to reduce any risk of damage to this
product, please read and follow each of these safety instructions.
Follow all instructions found in this manual.
Follow all instructions found on the product.
Do not attempt to perform any service on this product unless specifically instructed to in this manual.
Objects that can damage or be spilled on this product should be kept away from this product. Liquids, if spilled, could come
into contact with voltage points causing a risk of fire or electrical shock.
Always unplug this product before cleaning it. Do not use any liquid or aerosol cleaners to clean it.
Do not install or use this product near water
Be sure to mount this product on a solid, stable surface or in a rack (if applicable)
Route all cables and the power cord away from sharp edges or objects that could cause damage to them
Use only the power cord or AC adapter that came with this unit or one that meets the requirements specified in this manual
Use only a properly grounded 3-wire electrical outlet for power connection
Unplug this product and contact NTI should any of the following conditions occur:
The power cord or connection cables have been damaged
The product has come into contact with any liquids
The product does not operate properly despite having followed all of the instructions
The product has been dropped or the case has been damaged in any way
The product performs distinctly different than it did when first put into service
