NTI RACKMUX-V17-N-8USBHD-IP RACKMOUNT DRAWER WITH USB KVM SWITCH AND KVM ON IP
32
Display Usage
To display usage statistics for the UNIMUX, press <
D
> from the Administration menu.
The Display Usage page shows the user how many times the UNIMUX has been power cycled and how many total hours it has
been powered ON. The counters for these statistics can be reset to 0 by pressing <
F7
> to reset the number of power cycles or
<
F8
> to reset the hours of usage.
Figure 39- Usage Statistics Page
Ethernet Configuration
To configure the ETHERNET port settings on the UNIMUX for controlling the switch via Telnet Interface (page
Error! Bookmark
not defined.
), press <E> from the Administration menu. The default values are shown in Figure 40.
Function
Keystroke
Change the IP Address
I
Change the Subnet Mask
S
Change the Gateway
G
Change the port number
T
Exit and return to previous menu
Esc
Figure 40- Ethernet Configuration
If the Ethernet feature is not present in the UNIMUX, the message “
Ethernet Card Not Present
” will appear at the bottom of
this menu in Figure 40.
If the Ethernet port is present but not connected, the message “
Ethernet Card Present, Status: Not Connected
” will
appear at the bottom of the Ethernet Configuration menu (Figure 40).
Note: The Ethernet port is not available when the CAT5 option is present.
Not supported in this product
