NTI RACKMUX Series, Руководство по установке

Страница: 30 / 62

NTI RACKMUX-V17-N-8USBHD-IP RACKMOUNT DRAWER WITH USB KVM SWITCH AND KVM ON IP
25
Help Mode
To enter Help Mode press the <
F1
> key from the Command Mode
menu (see page 13).
Help Mode displays a list of commands with a short explanation of
their function. The following options allow the user to quickly
obtain information on any command
.
Function Keystroke
View the previous page of help
if available Page Up
View the next page of help if available Page Down
Exit Help Mode Esc
Figure 26- Main Menu help screen
Scan Mode
Using Scan Mode, the user can automatically switch from one CPU to another in predetermined configurable time intervals. The
CPU ports to be scanned are easily selected provided the user has access to them. At initial startup, the user as access to all
CPU ports by default.
To activate or deactivate Scan Mode press
<
Ctrl
> + <
S
> from the Command Mode menu. The text shown in the menu (see
Figure 22) will toggle between “
Scan=N
” and “
Scan=Y
”, each time the <
Ctrl
> + <
S
> keys are pressed. When “
Scan=Y
” is
shown, Scan Mode is active. When “
Scan=N
” is shown, Scan Mode is OFF.
From the Settings menu (see page 23) press <
S
> to access the “Scan List”. The Scan List enables the user to select specific
ports to be active in Scan Mode. While active, the user will have full device control of the connected port. Only the selected
ports will be scanned in Scan Mode.
The “Scan List” is a check list with all the port numbers displayed

unchecked box = the corresponding port is not in the scan list

checked box = the corresponding port is in the scan list
From the “Scan List” the user can:

toggle the state of the selected port (press <
Spacebar
>)

select all ports to be scanned (press <
A
>)

deselect all ports so that none are scanned (press <
N
>)

find a specific port to either select or deselect (press <
F
> ,
then any alphabetical or numeric character to locate the desired port).
Figure 27- Scan List
A port is skipped from the scan cycle if one of the following conditions is true:
- the port is not in the Scan List
- Security Mode is enabled and the user does not have access rights to the port
- the CPU connected to the port is OFF