NRI Currenza H2 Hopper Series, Техническая документация инструкция

Страница: 9 / 47

9
National Rejectors, Inc. GmbH, Buxtehude
G
ENERAL INFORMATION
Fig. 1a: h
2
X with large bowl and long
cover
Scope of delivery
• Hopper currenza h
2
• Mounting bracket
Models
Most notably the hopper models differ in the coin capacity. All models can
be equipped with or without full or empty recognition and be fixed onto two
different mounting brackets depending on the machine dimensions.
Coin capacity (S/M/L/X)
The hopper capacity is defined by shape and depth of the bowl and the front
bowl cover.
The four hopper sizes S, M, L, and X are made up of two different sized bowls
and two appropriate front covers for each bowl. The width and the height of
the hopper is always the same (cp. Chap. 8 "Technical data"). The hopper
size is embossed on the front cover (see Fig. 1a).
The hopper models h 2 L and h 2 X are projected and cannot be
delivered yet.
Hopper Bowl Cover
h
2
S small S (short)
h 2 M small M (long)
h
2
L large L (short)
h 2 X large X (long)
Exchanging the front cover
increases or decreases the
hopper capacity.
Full and empty recognition
All hopper models are available with empty or full recognition or with empty
and full recognition.
The recognition is put into effect using electric contacts in the hopper bowl
(not available for retrofitting), which are closed by the coins from a certain
filling level on or up to a certain filling level (cp. Chap. 4 "Function").