NRI Currenza H2 Hopper Series, Техническая документация инструкция

Страница: 23 / 47

23
National Rejectors, Inc. GmbH, Buxtehude
S
TART
-
UP
Fig. 6b: Aligning coin passage –
view from the side
Fig. 6c: Aligning coin passage –
spigots and coin passage dimensions
27,6
11,1
96,3
67,8
12,5
32,64
60°
Fig. 6a: Aligning coin passage – top view
5,4
26,1
Aligning two hoppers with coin passage
If you want to install two hoppers
and use the coin passage, the
mounting brackets of the two
hoppers must be installed in the
machine, so that the coin outlet of
the one hopper is aligned with the
coin passage of the other hopper
(see Fig. 6a-c for example:
Mounting bracket with spigots and
section "Installing mounting
bracket" in this chapter).
Changing default settings (option)
If you do not want the hopper to operate in the mode ordered by you and set
by NRI and want to reconfigure the machine interface or set a particular
ccTalk address (defaul setting: 3), it is advisable to change these settings
before connecting and installing the hopper (see Chap. 6 "Operation").