NRI Currenza H2 Hopper Series, Техническая документация инструкция

Страница: 34 / 47

34
National Rejectors, Inc. GmbH, Buxtehude
T
ECHNICAL DATA
8 Technical data
This chapter contains information about
• all relevant hopper data
• maximum capacities
• the CE certification
• the machine and empty/full interfaces
• mounting dimensions
Device data
Supply voltage 12/24V DC, ± 10 %
Current consumption Standby mode: approx. 50 mA, ± 10 %
Inrush current, motor: approx. 3.5 A, ± 10 %
(for approx. 75 ms)
Coin payout
... with coins:
approx. 450 mA, ± 30 %
... without coins: approx. 350 mA, ± 40 %
Electric strength parallel: 13.2V at 12V; 26.4V at 24V
Inputs/outputs ccTalk: ccTalk data voltage
Temperature range Operating temperature: 5 °C up to 50 °C
Storage temperature:
-25 °C up to 70 °C
Temperature change Max. 0.2 °C/min.
Rel. humidity 10 % up to 90 %
Condensation Not permitted
Machine interface 10-pole terminal strip (standardized)
parallel: 1 control input (active low: 0V, inactive high: 5V)
1 coin output (open collector) (active low: 0V, inactive high:
5V)
1 error output (open collector) (active low: 0V, inactive
high: 5V)
ccTalk: 9600 baud, 8-bit, N, 1, 1, 5 V TTL, common transmitting
and receiving line, active low
Protocol according to ccTalk 4.2, Money Controls (see
section "Implemented ccTalk commands" in this chapter)
For pin assignment see section "Interfaces“ in this chapter